Author Topic: Check valves and vibration  (Read 2814 times)

Offline BK

  • Sr. Member
  • ****
  • Posts: 310
    • View Profile
  • Your Best Time: 8.45 / 5.30
  • Your Track: Empire Dagway
  • Your Vehicle: Late 70's FED
Check valves and vibration
« on: June 03, 2015, 09:11:45 AM »
Spud,
 What are your thoughts about isolating your check valves from engine vibration. Is it necessary? 

Offline Spud Miller

  • Global Moderator
  • Sr. Member
  • *****
  • Posts: 332
    • View Profile
    • Fuel Injection Ent., LLC
Re: Check valves and vibration
« Reply #1 on: June 03, 2015, 09:37:02 AM »

 An idle or main check valve is open all the time anyway. A pump saver is set so high (130+) that it isn't going to open from vibration. A Secondary is ineffectual at wide open throttle. The only one I might worry about is a high-speed lean out set under 60 PSI. I think a vibration problem is pretty rare, but I have heard of them.

 Spud

 

Fuel Injection Enterprises, LLC
     Mechanical Injection
     Magnetos
     EFI Conversions