Technical > Matt Shaff's Engine Shop
Custom Pistons and all the cool extras you can get
masracingtd1167:
--- Quote from: FEDNV on May 21, 2015, 02:49:00 PM ---Well after dealing with JE for a few days trying to get information and frankly some attitude on the phone from the tech people I ended up calling Ross pistons. I spoke to a tech guy there and he was very familiar with the heads I have and said I do not need custom pistons and they have an off the shelf dome that will fit and have the compression I was looking for (in fact a bit more closer to 16:1). Also, these come with gas porting, accumulator groove and a few other "extras" that JE charged for. These also come with the .043, .043, 3mm ring pack so in the end I am pretty happy. I can also order these through Summit and get pro shop pricing.
--- End quote ---
Just be very careful with that much compression with your intake closing can be very important with injected alcohol . alcohol takes up volume and raises your compression even higher ! Too much dynamic compression can cause some serious issues .
Navigation
[0] Message Index
[*] Previous page
Go to full version