« previous next »
Pages: [1]   Go Down

Author Topic: Camshaft help and advice  (Read 4227 times)

Ponti

  • Guest
Camshaft help and advice
« on: May 06, 2015, 01:03:03 PM »
Hi Matt,

 Hope you or some of the others can help.  I'm looking for a cam for my engine build. Engine is a SBC 355ci, will be running a 6-71 supercharger' mechanical injection. Fuel will be Methanol. I'm thinking a roller cam would be a good idea to reduce the maintenance, not sure if that's right.
Logged

Offline Paul New

  • Hero Member
  • *****
  • Posts: 744
    • View Profile
  • Your Best Time: 6.47 @ 214 MPH SBC
  • Your Engine: 387" SBC
  • Your Track: Woodburn Dragstrip
  • Your Vehicle: 2005 FED
Re: Camshaft help and advice
« Reply #1 on: May 06, 2015, 05:50:38 PM »
I have been running virtually the same camshaft in all my blown SBC's anywhere from .720 lift to .780 lift  288 & 292 duration @.050 and 114 degrees
Logged

Offline George

  • Hero Member
  • *****
  • Posts: 515
    • View Profile
  • Your Vehicle: 1964 Mercury Comet Super Stock/ M automatic
  • General Location: Midwest USA
Re: Camshaft help and advice
« Reply #2 on: May 07, 2015, 02:51:03 AM »
I run the Herbert Roller cam P/N CR 274 with good results. 309in-318 adv. dur. and .652-.643 valve lift. George
Logged

Offline Frontenginedragsters

  • Full Member
  • ***
  • Posts: 202
    • View Profile
    • Pro-Formance Specialties
Re: Camshaft help and advice
« Reply #3 on: May 08, 2015, 07:19:37 AM »
Ponti:
 A roller cam is a good choice. The specs posted by the other guys is spot on. Spend good money on lifters and rocker arms.
Cheap lifters will fail and ruin everything else you worked hard to buy.
I suggest the Crower Hi-Po roller lifters.

Matt
Logged
Driving a Front Engine Dragster builds character and keeps you awake for a 1/4 mile at a time.
http://www.pro-formancespecialties.com/
Pages: [1]   Go Up
« previous next »