« previous next »
Pages: 1 [2]   Go Down

Author Topic: Teardown surprise  (Read 12441 times)

Offline ricci32

  • Full Member
  • ***
  • Posts: 142
    • View Profile
  • Your Engine: sbc ,gas, 358cid
  • Your Track: Lebanon Valley
  • Your Vehicle: Vintage style FED
Re: Teardown surprise
« Reply #15 on: February 27, 2015, 12:45:11 PM »
On the east coast our dirt modifieds have a flat top piston rule so we fly cut the heads and get them down to 47cc combustion chambers and 13 to 1 compression 245lbs maybe the engine was built for a different purpose I have two of thease engines left over and im using them in a digger.
Logged

Offline janjon

  • Full Member
  • ***
  • Posts: 208
    • View Profile
  • Your Best Time: 5.74/124 1/8
  • Your Engine: SB Chev, gas, 350ish
  • Your Track: Houston Motorsports Park
  • Your Vehicle: '65-ish 150" SBC/Glide FED
Re: Teardown surprise
« Reply #16 on: March 02, 2015, 04:40:53 PM »
Thanks to you all for the responses and advice. I shall proceed accordingly.
John
Logged
Just keep the same amount of stuff on the right
as there is on the left. Seeing straight ahead is highly overrated....

Offline janjon

  • Full Member
  • ***
  • Posts: 208
    • View Profile
  • Your Best Time: 5.74/124 1/8
  • Your Engine: SB Chev, gas, 350ish
  • Your Track: Houston Motorsports Park
  • Your Vehicle: '65-ish 150" SBC/Glide FED
Re: Teardown surprise
« Reply #17 on: March 31, 2015, 06:34:27 PM »
Jon, how did y'all do at the march meet?
Logged
Just keep the same amount of stuff on the right
as there is on the left. Seeing straight ahead is highly overrated....
Pages: 1 [2]   Go Up
« previous next »