Author Topic: nozzle location  (Read 2825 times)

Offline up in smoke

  • Newbie
  • *
  • Posts: 25
  • it all smoke and mirrors
    • View Profile
  • Your Best Time: 5.1 @ 128 { 7-25-15}
  • Your Engine: 540 dart crower stacks alky
  • Your Track: empire dragway, leicester ny
  • Your Vehicle: 2014 FED,140" 540ci pg injected on alky
nozzle location
« on: February 08, 2015, 07:55:50 AM »
hi, I have a 540 ci dart block and heads using a crower stack injection, hilborn 1 pump [all flowed and checked ] the motor came out of a drag boat and has the nozzles above the throttle plates, I was told to move them below..any opinion will be appreciated. thanks mike
its all smoke and mirrors

dreracecar

  • Guest
Re: nozzle location
« Reply #1 on: February 11, 2015, 08:30:52 AM »
I can see the nozzles up high if the unit was calibrated for gas, now with the alc, you want them low so as not to displace the air going into the runner.