Technical > Roo Man's Room

Wheel bearings - where to buy?

<< < (3/3)

dreracecar:
Some cars/wheels/people use sealed ball bearings in the front wheel hubs, I know I do and a little easier to get than Timken Rollers and dont have to worry about the seal and flinging grease.
Inner bearing is 25mm ID and the outer is .625 ID. Just pay particular attention to the adj nut as you may have to sand the back side to get the slots to line up with the cotter key and have proper preload on the bearings.Dragsters dont carry that much front end weight for a long time and distance that the load rateings are still within specs

gasserx:
This is what my bearings says:
Inner: 9105PP
Outer: 204PP

I found several matches when i did a quick google search

Navigation

[0] Message Index

[*] Previous page