Technical > Dan Dishon's Transmission Den

Rear to trans

<< < (2/2)

bikeguy307:
Kinda hard to tell from your picture if your chrome piece bolts on to anything other than the trans. It looks to be a cover for the drive shaft just to keep things from getting into the shaft. If it bolts to the chassis it could be being used as a limiter.

As far the blocking/removing the solenoid it depends on if it's a pro brake or not. If it's a pro brake you will need to use the solenoid to back up so blocking/removing is not an option. If it's a standard brake then you can remove the solenoid and install a modulator plug, be sure to leave the brake valve and spring in the trans.

Hope this helps,

Dan

gasserx:
Thanks a lot Dan! Guess i`ll have to unbolt it then and have a look, good to know what the purpose of it is  :)
Nice to learn all the details about the car.

Navigation

[0] Message Index

[*] Previous page