« previous next »
Pages: [1]   Go Down

Author Topic: Push throttle  (Read 9629 times)

Offline FEDNV

  • Jr. Member
  • **
  • Posts: 99
    • View Profile
  • Your Best Time: 7.65 @ 175mph - 1/4
  • Your Engine: 560 BBC
  • Your Track: Sacramento
  • Your Vehicle: 185" FED
Push throttle
« on: December 28, 2014, 06:02:50 AM »
I have space issues around my throttle pedal and have had a hokey bell crank setup with the normal pull action on the cable.  I looked in the rule book but did not find anything specifying the throttle had to be a pull action.  Only thing I found for sure is you do have to have a throttle return spring.  You have to run a push/pull morse style cable anyways so I was going to run it from the front and push the throttle.  Did I miss something in the rules?  Anyone ever do this for drag racing?  Found some pics of this done on boats.
Logged

Offline masracingtd1167

  • Hero Member
  • *****
  • Posts: 1110
  • bill masiello Shelton Ct.
    • View Profile
  • Your Best Time: 7.40's at 181 on motor 6.94 at 192 nitrous
  • Your Engine: 394 chevy
  • Your Track: Lebanon Valley Dragway
  • Your Vehicle: 2003 Neil and Parks
Re: Push throttle
« Reply #1 on: December 28, 2014, 06:22:11 AM »
It's a push pull cable so why not ?
Logged

Offline H.G. Wells

  • Full Member
  • ***
  • Posts: 116
    • View Profile
  • Your Engine: Mild 383 SBC or 498 blown BBC
  • Your Track: Currently San Antonio, past Amarillo, Ardmore OK, Noble OK
  • Your Vehicle: late 60's FED of unknown origin
Re: Push throttle
« Reply #2 on: December 28, 2014, 11:21:09 AM »
I do not have pics, but both of my cars have been push set ups.
Logged
Racecar spelled backwards is racecaR

Offline FEDNV

  • Jr. Member
  • **
  • Posts: 99
    • View Profile
  • Your Best Time: 7.65 @ 175mph - 1/4
  • Your Engine: 560 BBC
  • Your Track: Sacramento
  • Your Vehicle: 185" FED
Re: Push throttle
« Reply #3 on: December 28, 2014, 12:30:23 PM »
I ended up fabbing up this today.  Should work fine.



Logged

Offline ricci32

  • Full Member
  • ***
  • Posts: 142
    • View Profile
  • Your Engine: sbc ,gas, 358cid
  • Your Track: Lebanon Valley
  • Your Vehicle: Vintage style FED
Re: Push throttle
« Reply #4 on: December 28, 2014, 01:02:47 PM »
I never liked a push cable seems to push a little hard then cam over and get easier I looped my morse cable behind the rearend housing  and came up behind the peddle made a tab off the pedal and made it a pull.
Logged

dreracecar

  • Guest
Re: Push throttle
« Reply #5 on: December 28, 2014, 01:32:50 PM »
Turn the carb around so that the linkage is on the right hand side.
Logged

Offline fuel749

  • Full Member
  • ***
  • Posts: 159
    • View Profile
    • Dragster Supply
  • Your Track: New England Dragway
  • Your Vehicle: FED/Altered
Re: Push throttle
« Reply #6 on: December 29, 2014, 06:24:49 AM »
Quote from: dreracecar on December 28, 2014, 01:32:50 PM
Turn the carb around so that the linkage is on the right hand side.

This is what I do. If your throttle pedal is mounted up off the floor a bit, a lever off the bottom portion of the pedal makes a nice clean pull throttle. If not, do what Ricci32 suggested and loop the cable around the housing and mount it to the top of the pedal.
Logged

Offline Scott Krieger

  • Newbie
  • *
  • Posts: 33
    • View Profile
  • Your Best Time: 8.75 ET - 152.00 MPH 1/4 mile
  • Your Track: LVMS
  • Your Vehicle: Front Engine Dragster
Re: Push throttle
« Reply #7 on: December 30, 2014, 08:24:04 AM »
That's how we run ours, like you have mocked up. But you'll need a brace under the cable mount' down to the head or manifold to stop from flexing down when you hit the throttle.
Logged

Offline fuel749

  • Full Member
  • ***
  • Posts: 159
    • View Profile
    • Dragster Supply
  • Your Track: New England Dragway
  • Your Vehicle: FED/Altered
Re: Push throttle
« Reply #8 on: December 30, 2014, 09:47:49 AM »
A throttle stop under the pedal is an excellent idea as well.
Logged

Offline FEDNV

  • Jr. Member
  • **
  • Posts: 99
    • View Profile
  • Your Best Time: 7.65 @ 175mph - 1/4
  • Your Engine: 560 BBC
  • Your Track: Sacramento
  • Your Vehicle: 185" FED
Re: Push throttle
« Reply #9 on: December 30, 2014, 03:16:09 PM »
Thanks for all the reply's, going to stick with my setup I have but maybe redo my bracket with a thicker piece of aluminum so it doesn't flex like mentioned.  I will definitely be doing a new and improved throttle stop for the pedal itself.  I never realized how hard I was pushing on the throttle pedal with the transbrake engaged at the start until I broke my current throttle stop setup.  Adrenaline is awesome!!!
Logged
Pages: [1]   Go Up
« previous next »