pistons

[hotrodharley]

my brother is looking for some forged domed 383 sbc pistons;perfer to be 4.030 bore or something oversized?can e-mail me with brand/part no#/comp ratio//pics and price to darksidefuelaltered@gmail.com

[dusterdave173]

I have good set lite JE domes they are for 4.005 so if you have a std block that you can hone .005 then...they are 1.115 CH so a 6 in or 6.125 rod depending on deck height
with pins--$225 shipped  I just don't have a block and all my stuff is regular 350 so I just don't need them Thanks  David 704 244 6649   jdk@ctc.net

[hotrodharley]

I have good set lite JE domes they are for 4.005 so if you have a std block that you can hone .005 then...they are 1.115 CH so a 6 in or 6.125 rod depending on deck height
with pins--$225 shipped  I just don't have a block and all my stuff is regular 350 so I just don't need them Thanks  David 704 244 6649   jdk@ctc.net

thanks for offer but brothers block going need to go .030 over to clean up taper in clyinders

[JrFuel Hayden]

I have 10 JE high compression 15;1, depending on your combustion camber size, for 23° SBC with 4.14 piston size. $200.00
Email me jchansen60@gmail for more info

Jon Hansen, 805-444-4489 [ SoCal]

[hotrodharley]

I have 10 JE high compression 15;1, depending on your combustion camber size, for 23° SBC with 4.14 piston size. $200.00
Email me jchansen60@gmail for more info

Jon Hansen, 805-444-4489 [ SoCal]
[/quot

TO MUCH COMP FOR HIS COMBO;;