Author Topic: pistons  (Read 6227 times)

Offline hotrodharley

  • Jr. Member
  • **
  • Posts: 66
    • View Profile
  • Your Engine: 540 BBC/12-71 BLOWER/26%OD/PG TRANS/4;10 GEARS
  • Your Track: GOODTIMES DRAG STRIP
  • Your Vehicle: FUEL ALTERED
pistons
« on: December 14, 2014, 10:25:39 PM »
my brother is looking for some forged domed 383 sbc pistons;perfer to be 4.030 bore or something oversized?can e-mail me with brand/part no#/comp ratio//pics and price to darksidefuelaltered@gmail.com
"DARK SIDE" AA/fuel altered
"BADTOYZZ RACING
SPRING CREEK NV

Offline dusterdave173

  • Hero Member
  • *****
  • Posts: 638
    • View Profile
  • Your Best Time: 5.38in 1/8th
  • Your Engine: 355 CI SBC
  • Your Track: Mooresville, NC
  • Your Vehicle: CenPen 200 inch FED
Re: pistons
« Reply #1 on: December 16, 2014, 05:03:33 AM »
I have good set lite JE domes they are for 4.005 so if you have a std block that you can hone .005 then...they are 1.115 CH so a 6 in or 6.125 rod depending on deck height
with pins--$225 shipped  I just don't have a block and all my stuff is regular 350 so I just don't need them Thanks  David 704 244 6649   jdk@ctc.net
I have always had a fascination with fast cars at the expense of more normal character development

Offline hotrodharley

  • Jr. Member
  • **
  • Posts: 66
    • View Profile
  • Your Engine: 540 BBC/12-71 BLOWER/26%OD/PG TRANS/4;10 GEARS
  • Your Track: GOODTIMES DRAG STRIP
  • Your Vehicle: FUEL ALTERED
Re: pistons
« Reply #2 on: December 16, 2014, 08:41:05 AM »
I have good set lite JE domes they are for 4.005 so if you have a std block that you can hone .005 then...they are 1.115 CH so a 6 in or 6.125 rod depending on deck height
with pins--$225 shipped  I just don't have a block and all my stuff is regular 350 so I just don't need them Thanks  David 704 244 6649   jdk@ctc.net

thanks for offer but brothers block going need to go .030 over to clean up taper in clyinders
"DARK SIDE" AA/fuel altered
"BADTOYZZ RACING
SPRING CREEK NV

Offline JrFuel Hayden

  • Hero Member
  • *****
  • Posts: 600
    • View Profile
    • Hayden Enterprises Speciality Wheels
  • Your Best Time: 6.02, 236 mph, 1/4 in 1973 Div 3 TF Champ
  • Your Engine: SBC, Alky, 403 ci, Best 6.99 @ 190 & 409 Hemi
  • Your Track: Bakersfield
  • Your Vehicle: 225" FED NHRA Heritage Jr Fuel
Re: pistons
« Reply #3 on: December 16, 2014, 12:15:23 PM »
I have 10 JE high compression 15;1, depending on your combustion camber size, for 23° SBC with 4.14 piston size. $200.00
Email me jchansen60@gmail for more info

Jon Hansen, 805-444-4489 [ SoCal]
Jon C. Hansen

Hayden Wheels

Offline hotrodharley

  • Jr. Member
  • **
  • Posts: 66
    • View Profile
  • Your Engine: 540 BBC/12-71 BLOWER/26%OD/PG TRANS/4;10 GEARS
  • Your Track: GOODTIMES DRAG STRIP
  • Your Vehicle: FUEL ALTERED
Re: pistons
« Reply #4 on: December 24, 2014, 05:30:28 AM »
I have 10 JE high compression 15;1, depending on your combustion camber size, for 23° SBC with 4.14 piston size. $200.00
Email me jchansen60@gmail for more info

Jon Hansen, 805-444-4489 [ SoCal]
[/quot

TO MUCH COMP FOR HIS COMBO;;
"DARK SIDE" AA/fuel altered
"BADTOYZZ RACING
SPRING CREEK NV