Author Topic: support bar cut out  (Read 15079 times)

dreracecar

  • Guest
Re: support bar cut out
« Reply #15 on: November 20, 2014, 09:38:10 AM »
If you do decide to PC check with local companys as to how big their oven is so your frame will fit. In SoCal, there is only one place I know of that has a long 25' booth, but he charges $900 just to coat (blasting extra) .The guy around the corner from my shop did a 150" (about max for his oven)car for $280

Offline BK

  • Sr. Member
  • ****
  • Posts: 310
    • View Profile
  • Your Best Time: 8.45 / 5.30
  • Your Track: Empire Dagway
  • Your Vehicle: Late 70's FED
Re: support bar cut out
« Reply #16 on: November 20, 2014, 10:06:35 AM »
I'm not very good at leaving things alone. Anytime you want to add or subtract from the chassis. you need to grind the coating off then figure out how to make it look decent after that. If I started with a new chassis I would just use a rattle can and touch it up as needed. A PC chassis does look really nice when there done right just personal preference.

Offline hotrod316

  • Sr. Member
  • ****
  • Posts: 352
    • View Profile
Re: support bar cut out
« Reply #17 on: November 20, 2014, 11:48:39 AM »

Sometimes why try to educate known it all
Glenn you can delete this if you like


Wow, Never saw a Magnaflux booth that big that would handle an entire chassie before

dreracecar

  • Guest
Re: support bar cut out
« Reply #18 on: November 20, 2014, 02:41:37 PM »
Dude, what your deal???
 been around stations that mag certify a lot of parts for me, and have never seen one big enough to handle a complete chassie, does not mean they dont exist, I have never seen one and if you have one or have access to one, thats great.

Offline GlennLever

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 2010
    • View Profile
    • The Lever Family Site
  • Your Best Time: 1/4 mile 7.950 at 165 MPH
  • Your Engine: Pontiac 461 Alky Blown
  • Your Track: Empire Dragway, NY
  • Your Vehicle: Front Engine Dragster
Re: support bar cut out
« Reply #19 on: November 22, 2014, 08:49:32 PM »
Guys, It's is my bad that I missed this, remember

 Everyone has a right to their opinions, and a right to do it differently then you might.

I will not allow the kind of stuff that went on over on HRE.

In my defense the forum is getting large enough that I just cannot read every post. It might be time to look for someone to help.
« Last Edit: November 22, 2014, 08:56:06 PM by GlennLever »
Glenn R. Lever
Rochester, New York 14617-2012
My Cars https://www.lever-family-racing.com/