« previous next »
Pages: [1]   Go Down

Author Topic: hoses for burn down breathers  (Read 8335 times)

Offline speedbump

  • Newbie
  • *
  • Posts: 16
    • View Profile
  • Your Best Time: n/a
  • Your Track: e-town lebbaon valley
  • Your Vehicle: fed
hoses for burn down breathers
« on: July 29, 2014, 02:10:57 PM »
i'm looking for hoses that i can use on my burn down breathers. they need to be 1.125 id x 1.250 od.  i need roughly 6-8ft. maybe someone has some or info. on where to get some. i really didn't want not use the flat hose. Thanks Mike
Logged

Offline GlennLever

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 2010
    • View Profile
    • The Lever Family Site
  • Your Best Time: 1/4 mile 7.950 at 165 MPH
  • Your Engine: Pontiac 461 Alky Blown
  • Your Track: Empire Dragway, NY
  • Your Vehicle: Front Engine Dragster
Re: hoses for burn down breathers
« Reply #1 on: July 29, 2014, 02:21:14 PM »
Home depot, swimming pool hose (nylon reinforced). That will start the argument on fire rated hose. But is what I used.

I like the clear so I can see if there is anything in them, black probably looks better.

Logged
Glenn R. Lever
Rochester, New York 14617-2012
My Cars https://www.lever-family-racing.com/

dreracecar

  • Guest
Re: hoses for burn down breathers
« Reply #2 on: July 29, 2014, 02:45:08 PM »
Clear hose from HD works fine , the trick is to find a store  that has a new roll so you get some from the beginning, If you get the last piece it has been flattened/squashed that its nearly impossable to get round again
Logged

Offline wideopen231

  • Hero Member
  • *****
  • Posts: 1911
    • View Profile
  • Your Best Time: 1/8 3.70@ 198 1/4 5.78@245
  • Your Engine: Hemi 526 ci alcohol
  • Your Track: Piedmont
  • Your Vehicle: 225 CMC FED
  • General Location: NORTH CAROLINA
Re: hoses for burn down breathers
« Reply #3 on: July 29, 2014, 03:20:26 PM »
x3 Home depot
Logged
Relecting obama is like shooting right foot because it did not hurt enough when you shot left foot

Offline dfrye55

  • Newbie
  • *
  • Posts: 3
    • View Profile
  • Your Track: Pittsburgh Raceway Park
  • Your Vehicle: 55 Chevy, 51 Chevy
Re: hoses for burn down breathers
« Reply #4 on: November 16, 2014, 06:04:51 PM »
Anything wrong with using a black hose? What kind of black hose can you use?
Logged

Offline hotrod316

  • Sr. Member
  • ****
  • Posts: 352
    • View Profile
Re: hoses for burn down breathers
« Reply #5 on: November 17, 2014, 06:14:29 AM »
we use the black washer drain hose
Logged

Offline Totally T

  • Full Member
  • ***
  • Posts: 141
    • View Profile
    • NDRL
Re: hoses for burn down breathers
« Reply #6 on: November 17, 2014, 06:45:25 AM »
I used to see the flat discharge hose everywhere...has anyone tried it?
Logged
Troy Wilson
Nostalgia Drag Racing League

dreracecar

  • Guest
Re: hoses for burn down breathers
« Reply #7 on: November 17, 2014, 08:13:22 AM »
Black radiator hose swells and gets real rubbery with oil saturation, Oil resistant (NAPA green or gold stripe) hose gets expensive and is sold by the inch, Flat (blue) discharge hose looks like crap
Logged

Offline Draw 3D

  • Jr. Member
  • **
  • Posts: 71
    • View Profile
  • Your Engine: Blown Alky 406 SBC
  • Your Track: Wild Horse Pass
  • Your Vehicle: 1923 T Roadster
  • General Location: Arizona
Re: hoses for burn down breathers
« Reply #8 on: November 17, 2014, 01:30:21 PM »
X4 on the Home Depot hose but just be warned that it's not very flexible.
Logged
Pages: [1]   Go Up
« previous next »