Author Topic: Aluminium Anglia Spindles  (Read 4849 times)

Offline PSweeney

  • Full Member
  • ***
  • Posts: 231
    • View Profile
  • Your Track: Santa Pod
  • Your Vehicle: 138in SBC slingshot
Aluminium Anglia Spindles
« on: April 08, 2015, 03:02:10 AM »
I found a pair of Strange anglia spindles at a swap meet which are aluminium and anodized. 

I see Strange no longer sell these, they only offer the the 4130 anglia style and the Strange/Lamb/Camaro size adjustable height spindle for funny cars. 

Any reason not to use these ?

dreracecar

  • Guest
Re: Aluminium Anglia Spindles
« Reply #1 on: April 08, 2015, 08:17:10 AM »
Have been running alu P&S spindles for 20 years--- never an issue, of coarse you will need to add more weight to the front end

Offline wideopen231

  • Hero Member
  • *****
  • Posts: 1911
    • View Profile
  • Your Best Time: 1/8 3.70@ 198 1/4 5.78@245
  • Your Engine: Hemi 526 ci alcohol
  • Your Track: Piedmont
  • Your Vehicle: 225 CMC FED
  • General Location: NORTH CAROLINA
Re: Aluminium Anglia Spindles
« Reply #2 on: April 08, 2015, 12:37:31 PM »
If npt for deal I hit on with wheels tires and spindles as package deal I would have aluminum ones now. Will have them later anyway. If you are worried I'll buy them off of you.
Relecting obama is like shooting right foot because it did not hurt enough when you shot left foot

Offline PSweeney

  • Full Member
  • ***
  • Posts: 231
    • View Profile
  • Your Track: Santa Pod
  • Your Vehicle: 138in SBC slingshot
Re: Aluminium Anglia Spindles
« Reply #3 on: April 08, 2015, 02:11:46 PM »
thanks guys, think I'll hang onto them then for the next project

Offline RacinJacin

  • Newbie
  • *
  • Posts: 40
    • View Profile
  • Your Best Time: 9.30's
  • Your Track: Thompson
  • Your Vehicle: FED
Re: Aluminium Anglia Spindles
« Reply #4 on: April 09, 2015, 08:24:23 PM »
Watched a FED at our local track make a very nice pass...as they were towing it back to the pits the front wheel came off.  Aluminum spindle broke.  I heard that they had either forgot to grease the bearing or something. Anyways the heat weaken the aluminum and it let go. This might be one reason they are hard to find.

Offline wideopen231

  • Hero Member
  • *****
  • Posts: 1911
    • View Profile
  • Your Best Time: 1/8 3.70@ 198 1/4 5.78@245
  • Your Engine: Hemi 526 ci alcohol
  • Your Track: Piedmont
  • Your Vehicle: 225 CMC FED
  • General Location: NORTH CAROLINA
Re: Aluminium Anglia Spindles
« Reply #5 on: April 10, 2015, 10:55:53 AM »
Not hard to find. I know Parks carries them,thought strange had them in my last catalog,but then its 3 or 4 years old.
Relecting obama is like shooting right foot because it did not hurt enough when you shot left foot