« previous next »
Pages: 1 2 3 [4]   Go Down

Author Topic: 220" FED build  (Read 36093 times)

Offline janjon

  • Full Member
  • ***
  • Posts: 208
    • View Profile
  • Your Best Time: 5.74/124 1/8
  • Your Engine: SB Chev, gas, 350ish
  • Your Track: Houston Motorsports Park
  • Your Vehicle: '65-ish 150" SBC/Glide FED
Re: 220" FED build
« Reply #45 on: January 23, 2014, 08:54:27 PM »
Sorry, I didn't intend to be offensive, I just popped off, evidently. No disrespect intended. Tastes differ, I realize that, not everyone would agree with what I think is cool either. If that were the case, we'd all be playing with identical toys.

John
Logged
Just keep the same amount of stuff on the right
as there is on the left. Seeing straight ahead is highly overrated....

Offline hotrod316

  • Sr. Member
  • ****
  • Posts: 352
    • View Profile
Re: 220" FED build
« Reply #46 on: March 25, 2014, 08:41:51 AM »
ted, dragster looks good, a little late to be saying this, (And you probably accounted for it already) buut the upper frame rail around the motor looks awfully close. Which is good, except for how are you going to run yuor diaper straps? just curious, ours on our dragster is a pain to put on.wanted to save you a headache at the track,,

matt
Logged

Offline 225digger

  • Full Member
  • ***
  • Posts: 167
    • View Profile
  • Your Best Time: 7.43 185 mph in a RED
  • Your Track: numidia
Re: 220" FED build
« Reply #47 on: March 25, 2014, 06:21:50 PM »
hey matt , on the RED i had i ran the straps on the outside of the upper rails to the header flanges this way i didnt need to try and snake them between the block and rail . much easier that way ..... im not sure if ill run a diaper on this , or make a tall belly pan , im thinking of doing a belly pan this time around .


Logged
Pages: 1 2 3 [4]   Go Up
« previous next »