Technical > Dan Dishon's Transmission Den

Powerglide Vent

<< < (2/2)

bikeguy307:
Put grease on the tap and them use a vacuum on the hole to suck out anything left behind and you should be good!

Dan

jspell:
That method worked like a charm, used Q-tip with alcohol and it cleaned up very nice...great advice.

spitzerscott:
What is the easiest, best way to remove stock unit from case?    I want to try to do this with tranny in dragster.

bikeguy307:
If its a plastic one, a pair of pliers and a little wiggling will get it out. If its a metal one you may need vise grips and as they can be a little tougher to remove. Just remember your working with a 40 yo casting.

spitzerscott:
Dan, mine was plastic, less than 10 seconds with a screwdriver and its out.  Got breather tank ordered from Good Vibrations, be here next week, problem solved.  Thanks for your help.     Scott

Navigation

[0] Message Index

[*] Previous page