Drag Racing Discussions > Front Engine Dragsters

my fed crazyness....with cert

<< < (2/2)

rooman:
I have a customer who had his local tech guy replace the cage on his vintage FED. It is not even close to being legal as the front hoop is near vertical.
   At Bowling Green in 2010 I had a couple of newbie tech guys tell me that the shoulder belts in the fuel car were not legal as the were necked down to 2" wide where they sat on the HANS device--this despite the fact that the belts had a current 16.1 tag. Their argument was that the book said 3" wide and they might have been "rally car" belts. The book specifies that 16.1 is for 3" belts and narrowing them down so that the don't slip off the HANS is common practice among the belt manufacturers.

Roo

husker-rat:
I keep reading this about TECH inspectors and I wonder WHO hires these people and what makes them qualified? Safety IS first but common sense should be in there somewhere. Just because they have a title of TECH INSPECTOR does not mean they know what they are doing.I have seen this in the area that I live, both in drag racing ang dirt track racing.Some certification should be involved instead of just showing up and saying I will do it.

rooman:
Anyone who does NHRA certifications has to go to "school" with that group to get the credential. Track tech guys--not so much as it is usually whoever they can get for the job. That said the NHRA process seems to have some issues at times as evidenced by the guy that worked on my customer's car.

Roo

fuel749:
 
   At Bowling Green in 2010 I had a couple of newbie tech guys tell me that the shoulder belts in the fuel car were not legal as the were necked down to 2" wide where they sat on the HANS device--this despite the fact that the belts had a current 16.1 tag. Their argument was that the book said 3" wide and they might have been "rally car" belts. The book specifies that 16.1 is for 3" belts and narrowing them down so that the don't slip off the HANS is common practice among the belt manufacturers.

Roo
[/quote]
    And the belts are still 3" wide, just folded over and sewn. I hope you brought them up to speed.

LaneM:
having a cert on a ride is always better then not having it..the cost sucks but if you want to bail on that ride for another a up to date sticker might make the deal for you :)

Navigation

[0] Message Index

[*] Previous page