Drag Racing Discussions > Front Engine Dragsters

Finished My Car

<< < (6/6)

dreracecar:
CC sells those alu cable clamps also.  as far as the chute cable order a long one with swedged ends on the housing and have the swedge SS eyelets to the wire at each end, cut it in half,that way you have one and a spare for the cost of 1.
The SS eyes are simple and lite, otherwise it comes with a threaded end that you will have to thread on another heim to attach to the arm, complicated, heavy,cost more

masracingtd1167:
On my car I use the choke cable wire and run it inside a piece of plastic air brake line . I have my shifter on the right side of the car and it is very easy to get at . Bill

Navigation

[0] Message Index

[*] Previous page