Drag Racing Discussions > Front Engine Dragsters
10.20's and tech guy says don't come back without chassis cert
cj92345:
I can't find anything.... But this is what I 'am told today.... Running 10.20's at 130.... Is this right? Mines a older chassis but cage has been updated :o
dreracecar:
NHRA spec only calls out SFI for 9.99 and quicker, HOWEVER--- IF you are running in a class with a 9.60 index, even tho your car will only do 10.20's you are still required to have the SFI cert. If you are just bracket racing and your dial is 10.20 you dont need a SFI cert-- BUT the chassie must still comply with the diagrams shown in the rule book for 7.50 and slower, just does not have to be certed with a sticker.
Dolmetsch:
I had a fellow with what is called a silver ticket go over mine. He has spent a lifetime as track manager or employee in some form or another. He said mine was fine and would not should not raise any flags. One thing I know they look for is the K or diagonal bracing and a "foot box" And then there are from time to time tech guys who are not techy and easily influenced by someone who doesn't want you playing in their sandbox. Or putting it another way. Some fellows in tech scramble to appear knowledgeable and others are knowledgeable. Sometimes if they are unreasonable just don't go there. I remember two times in my career when I ran into idiots. Once in NY State a tech guy hassled me because I had a 7/16ths bolt on the battery hold down tray and the rule book said minimum 3/8ths. I talked my way through it that day but NEVER returned. Another west of here hassled me with our very successful Door slammer (in the book Old Reliable) because I had made my 5 point roll bar from 2 inch Dom .120" instead of 1 3/4". He was sure we were not going to run and went and got the NHRA tech guy (he was track owner or manager) The NHRA tech explained to him at least twice that my BAR Exceeded minimum specs and was properly made as per the current rules. He did the Well I dont know thing but reluctantly let us run that day. He never got a second chance from me as I never returned. As a sign in my friends machine shop says "Ignorance can be cured. Stupid is forever" Sometimes you just cant win. So you could get it teched which is up here about $140 and that would put an end to it or you could just avoid the place if you have another option. I carry a rule book right with me when I go to tech and make sure it is in plain sight just so they realize I am familiar with it in case they are not. For the most part we are welcomed and well treated but occasionally we meet a "donkey". Problems at the local track were traced down eventually to a personal hate of six cyl drag cars and the track manager eventually stepped in and crushed the nonsense. I had supplied a 300 ford six power to one of their track champions from my shop and he regular smoked the tech and starting line guys friends and brother so I was just getting that crap as payback. The track manager, even though we were never great pals saw through that and one day when they were hassling me and my car just stepped in and told them that was enough. Let Don run right now. And that was the end of it.
don
cj92345:
Thanks for the reply's.....and class is 10.00 and slower
dreracecar:
And your responce should be--
Im sorry I must have missed it. Would you please show me where it is in the rules so I may highlite it in my copy for future reference
Navigation
[0] Message Index
[#] Next page
Go to full version