Drag Racing Discussions > Front Engine Dragsters

To Drill or Not to Drill

<< < (2/2)

dreracecar:
5 per side here, 20 years and never a ploblem, Make sure you buy the Gd8 quality, pre- thread holes, lube is a must, and only tighten to the point of the head bottoming out

wideopen231:
On drilling and screws. I am going to try mine w/o screws and see if they move.marking boths sides of both wheels. If they move. Any reason I can dot drill and tread with tires on. Using a stop to prevent drilling to deep and into tires bead.

Maybe more trouble. Wheels I have have never been drilled and if possible i would rather not. Wheels may not work on car since they are bigger than most run on fed 14" wide and I may want to chnage to narrower and sale these,not drilled wheels seem to sale quicker and get more of my money back.

Navigation

[0] Message Index

[*] Previous page