Technical > Matt Shaff's Engine Shop

I need Engine

(1/6) > >>

gasserx:
I need some power in my FED for next spring, but dont know exactly what to choose.
Car is setup for SBC, so thats it gonna be, but no real requirements beyond that. No moderns though. Anyone wanna suggest something for a guy with a little bit of budget in mind? (I have a family that needs to be "fed" also).
It has to be some extra power over stock though, i still wanna race, not doing sunday picknicks  :P

Sure wanna run blown hemi on nitro, but thats not gonna happen in a few years.. i think  :o



 8) 8) 8)

dreracecar:
What are the classes available for you to run at your local track?? Carburated engines will get you into the 9.5et range, Injected alc will be 8.5et range, blown alc or injected with a taste of nitro gets you 7.50ets. High dollar blown alc or injected nitro will get you 7.0 and quicker ets

wideopen231:
SBC gives you hundreds of options. Want nostalgic go injected with zoomies and build biggest sbc you can. 383 i great power combo while not exploding 2 banks. Good strong 350 4 bolt main and steel 3.75 crank a set of 6" rods(nice but not a must). Get compression up in 13:1 range with good set of heads.Add a roller cam,cheaper when swapping cam choice. Id go for 275 to 280 @.050 and lifts in mi .600's. You should have good power to lite weight ratio and lots of fun. I think 600 to 650 range possible w/o getting stupid. Now you can get more but the cost goes up huge compared to power gains.
If not for having cpl motors sitting here I would go sbc route my self.I have always loved small blocks especailly older version. 283 was first motor I ever worked on .First motor I tore into I was 14.If dad had known how much that was going to cost? I have though about the 327 I have sitting here.New cam,better heads injection and run the heck out of it.Would be a blast.

 Bill should be chimming in.He runs sbc in his fed and its pretty bad small block,but Im sure he has lot more info on good combo than some Hemi racer would. Nothing else send him PM.

gasserx:
Car is 7.50, so cant go faster. And i dont want to go that fast to start with either, then i have no achievements to make.
My local track offers the regular classes, Pro ET, Super Pro ET, Super classes, Comp, etc... But also the Vintage club are allowed, and as far as i know they race in their own class, but i guess thats if there are cars to run. If only one or few cars, they probably dont run vintage class (Kjell/Sidewinder knows).

Looks like it have to be alco injected, thats what i have been thinking most of also... Just have to start somewhere.
How about block? Will a stock refreshed block do the job? You say steel ccrank, you mean a forged type?
I think i will try to find something that is already built, depends a little on time and money. Or maybe an assembled shortblock. Any idea how much i should put into it ($) to have something safe for lets say 40 runs? (thats about the maximum i can get in a summer i think)

wideopen231:
Block . Depend on goals. If just going with good hop up and staying around 600 hp then a stock block with machine is not bad choice.If you thank you may want to go stronger motor later a after makret block is good investment. Buying once cheaper than buying and then buying another. Forged yes not optional in my opion. Bill Mitchel as well as lots of others have good piece's. The cost is not much more than buying all of the same parts and building and some times they are cheaper.
I am firm beiliever in spend little extra now and save you lots later theory.

 You might want to check roush racing parts they buy alot of nascar stuff that has little to not run time and great pirces.A few have bought from them and said best deals the ever got. I do not have exact web site will have to research.These are very high dollar motors and one guy told me he figured he paid about 33 cent on the dollar for his and he swapped cams and went racing.
Go on few other web sites also and ask around lots of guys with great info,lots of morons also that everything about nothing and nothing about everything.Drag race results,Sout west JR fuel ass. SWJFA.com are both great avoid yellow bullet 90% a-holes.
 PM Duster Dave he has few contacts in Charolotte area NASCAR central,he might know web site.

Navigation

[0] Message Index

[#] Next page