BRAND NEW 548 BBC Blown Alcohol motor, manifold to pan. This motor is BRAND NEW and ready to fire. Over $20k has been invested in this top quality piece, heck the machine work and blueprinting/assembly alone was $4500. You'll not likely find a better deal out there. Owner is getting out of racing and moving, needs funds for new home.
All parts in this motor are BRAND NEW with ZERO run time. All machine work, blueprinting, and assembly done by Don O'Neil of O'Neil's Custom Engines (Spokane WA). Receipts for it all are in the photos (link below). Motor has not been fired.
Is setup for a blown alcohol combination. Just add your blower, fuel system, ignition, and valve covers and you'll have a complete running motor.
GM CNC Bowtie block w/billet steel splayed caps, Hard-blok filled
4.530 X 4.250 (548 cubic inch)
Block is O-ringed, uses copper head gaskets
Callies Pro Magnum crank with RCD crank hub
Venolia pistons & rods
Total Seal rings
ARP 12 pt head/main studs
DART 360 SOLID heads with Dart Full CnC porting
Stainless valves 2.30/1.90
T&D shaft rockers
Manley triple springs & ti retainers
Manton pushrods
Comp roller cam, blown alcohol profile, .748 lift, 286/298 duration @ .050
Isky Red Zone lifters, lifter bores are bronze bushed
Donovan Gear Drive
Titan wet sump pump
Manifold and pan below are the only used parts
Littlefield blower manifold with port nozzles
Billet Fabrication wet sump oil pan with baffle balls. Pan has a few dings in it but is fully functional
All machine work, blueprinting, and assembly professionally done by O'Neil's custom engines of Spokane WA. All clearances have been setup for blown alcohol combination.
Pictures of all at:
http://s707.photobucket.com/user/crdafoe/library/PartsGiving it all away for 50% of investment. $12k firm. Don't bother offering less. Located in Spokane WA. Can be available to pickup near Tacoma WA for extra.
Posting for a friend, please call him directly: Randy (509) 714-1443
