Author Topic: New guy...206" FED  (Read 8662 times)

Offline fedonnitro

  • Newbie
  • *
  • Posts: 15
    • View Profile
  • Your Best Time: Not reached yet!
  • Your Track: NorthStar, Texas Motorplex, Texas Raceway
  • Your Vehicle: 206" Blown/Injected FED
New guy...206" FED
« on: July 23, 2014, 06:08:38 PM »
Hello folks. Finally making time to join. Will try and visit whenever I can. Name's Carl Meador from central Texas. Been trying to drag race all my life seems like. Grew up with my dad racing his gassers and FED's. Mom always said they started taking me when I was only a couple weeks old. I have raced several different cars and drag bikes since I got my drivers license. Our current digger was built by Jerry Norman from west Texas in 2001 as a bare rolling chassis but remained in storage until 2008 when I asked Jerry to replace the Chrysler 8 3/4 with a 4340 fabbed housing, 40 spline Strange full floater and 3.89 pro gear. A small block Chevy at 355 ci. breathing through Brodix Track 1 heads carrying a standard 6-71 Mooneyham and 4 port Hilborns gives it some go. We use a powerglide with a 1.80 low and 12" M&H's to move it. It's a lot of fun and I wouldn't do it without the support of my wife, kids and grandkids and some very good friends. Guys like Troy Green, Spud Miller and Larry Decker keep us up and going. We have been blessed to compete at mostly local venues in our 5 state area with associations like Super Chevy, Texas Blown Fuel and the Southwest Heritage Racing series. Thanks for having us and I look forward to talking to y'all.

Offline GlennLever

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 2010
    • View Profile
    • The Lever Family Site
  • Your Best Time: 1/4 mile 7.950 at 165 MPH
  • Your Engine: Pontiac 461 Alky Blown
  • Your Track: Empire Dragway, NY
  • Your Vehicle: Front Engine Dragster
Re: New guy...206" FED
« Reply #1 on: July 23, 2014, 08:18:27 PM »
Welcome!
Glenn R. Lever
Rochester, New York 14617-2012
My Cars https://www.lever-family-racing.com/

Offline sknopp

  • Newbie
  • *
  • Posts: 41
    • View Profile
  • Your Best Time: 7.008@215 on 7.00 Index
  • Your Track: Bowling Green
  • Your Vehicle: 1969 MW 214" FED
Re: New guy...206" FED
« Reply #2 on: July 24, 2014, 09:37:55 AM »
Carl,

Is your dad Claude?

Steve K.

Offline fedonnitro

  • Newbie
  • *
  • Posts: 15
    • View Profile
  • Your Best Time: Not reached yet!
  • Your Track: NorthStar, Texas Motorplex, Texas Raceway
  • Your Vehicle: 206" Blown/Injected FED
Re: New guy...206" FED
« Reply #3 on: July 24, 2014, 01:38:13 PM »
Yes sir, dads name was Claudie. Those years from the late 80's through the late 90's were a blast. We traveled a lot of places with his old top fuel fed. Met lots of very good folks along the way. A very good friend of mine said he had a short look at your deal in Bowling Green this year. 7.0 is the direction I would like to go for a little quicker fun!!

Offline sknopp

  • Newbie
  • *
  • Posts: 41
    • View Profile
  • Your Best Time: 7.008@215 on 7.00 Index
  • Your Track: Bowling Green
  • Your Vehicle: 1969 MW 214" FED
Re: New guy...206" FED
« Reply #4 on: July 25, 2014, 09:13:47 AM »
It was so cool to see Claudie get pushed back after his burnouts (no reverser).  I spoke with him several times at the Indy races.  Great person.

Steve K.

Offline Gold Digger

  • Newbie
  • *
  • Posts: 25
    • View Profile
  • Your Track: Gateway International
  • Your Vehicle: 210" FED
Re: New guy...206" FED
« Reply #5 on: July 26, 2014, 01:00:42 PM »
Welcome Carl, you probably don't remember but you & your dad bought a fire bottle off us at Indy, the time you guys blew a back tire on the dually and tore half the fender off! ;D

Offline fedonnitro

  • Newbie
  • *
  • Posts: 15
    • View Profile
  • Your Best Time: Not reached yet!
  • Your Track: NorthStar, Texas Motorplex, Texas Raceway
  • Your Vehicle: 206" Blown/Injected FED
Re: New guy...206" FED
« Reply #6 on: July 26, 2014, 02:32:25 PM »
I actually do remember that. Those fiberglass fenders were a thing of "beauty" when a 16" tire blows completely apart. Didn't take long after we got back for dad to go pick up a new metal CM brand bed to put on it. I truly miss going to the old GoodGuys Indy races. That was a 5 pound bottle with the discharge head on it, correct?

Carl

Offline fedonnitro

  • Newbie
  • *
  • Posts: 15
    • View Profile
  • Your Best Time: Not reached yet!
  • Your Track: NorthStar, Texas Motorplex, Texas Raceway
  • Your Vehicle: 206" Blown/Injected FED
Re: New guy...206" FED
« Reply #7 on: July 28, 2014, 03:28:58 PM »
If I have this photo posting figured out maybe these pics will come through OK? The first one is right after Jerry Norman installed the 9" Ford 4340 housing and full floaters in 2008. Jerry is the one with the beard in the middle. He was a great person and a great chassis builder.

Offline fedonnitro

  • Newbie
  • *
  • Posts: 15
    • View Profile
  • Your Best Time: Not reached yet!
  • Your Track: NorthStar, Texas Motorplex, Texas Raceway
  • Your Vehicle: 206" Blown/Injected FED
Re: New guy...206" FED
« Reply #8 on: July 28, 2014, 03:52:06 PM »
Another one as I am fabbing stuff to get it rolling.