Hello again,
Well I put the oil and plugs into the motor that was recommended to me on the forum, thanks. Now the problem is, if I squirt some gas down each stack, roll the motor over with the mag on, it'll fire. But I cant seem to get the Alcohol up to the pump or barrel valve. I've poured alcohol down the line from the pump back to the tank, and even poured some into the line from the pump to the barrel valve, still nothing. Many years ago I had a blown,injected on alcohol small block Chev, and I seem to remember that the motor fire on gas and almost right away the alcohol was up to the valve and into the motor.
Is there a special way to "prime" the pump on the motor? Oh and I just received the pump and the injection back from Hilborn, being flowed and rebuilt.
Thanks again guys,
Roger